Admin

Forum Replies Created

  • In reply to: Beta Tester Subscription 13 October 2014

    October 17, 2014 at 8:21 pm #2080
    Admin
    Keymaster

    The way to configure a CS:GO Macro is the expert configuration, which able you to configure each shot.

    For sure we can produce a video to demostrate how to configure a macro for CS:GO.

    I suggest, though there are thousands, using this good website :http://twowordbird.com/articles/csgo-recoil-mechanics/
    or here
    http://steamcommunity.com/sharedfiles/filedetails/?id=243468228

    Click on the detail on the weapon you will find help on how to configure every single shot of your macro.

    In this version we are releasing the Database Management, a utility that will allow you to add a game that is not on the list.

    [P]Recoil Patterns
    http://imgur.com/a/m1pz2/layout/horizontal#17

    [C]Recoil Compensation
    http://imgur.com/a/mzpuh/layout/horizontal#17

    [N]Recoil Compensation (inverted)
    http://imgur.com/a/pKFeR/layout/horizontal#17

    I hope this helps you ๐Ÿ˜‰

    In reply to: Hardware Locked (SOLVED)

    October 17, 2014 at 4:40 pm #2076
    Admin
    Keymaster

    i reset you , but your pictur is not for “HARDWARE LOCKED”.

    tell me if u are ok now.

    In reply to: Beta Tester Subscription 13 October 2014

    October 17, 2014 at 9:36 am #2068
    Admin
    Keymaster

    We would like to inform everyone that the session has not started and only our team is performing the last tests for debugging.

    We will make the beta available this weekend.

    Thanks to all

    In reply to: Hardware Locked (SOLVED)

    October 17, 2014 at 7:20 am #2065
    Admin
    Keymaster

    FIXED
    read related topix

    In reply to: check your connection and try again (SOLVED)

    October 17, 2014 at 7:18 am #2063
    Admin
    Keymaster

    Hi all,

    Yes REBECCA different Country.

    A SHIT Update of the shit plugin in the web site causes this problem. I have fixed this by deleting this shit plugin.

    Sorry for the inconvenience, it is updated by itself. While i was sleeping.

    Best Regards!

    In reply to: Beta Tester Subscription 13 October 2014

    October 13, 2014 at 7:19 pm #2007
    Admin
    Keymaster

    Core 3.4.7Building and upload!

    stay tuned

    [VIDEO]

    CORE 3.5 Preview

    [VIDEO]

    CORE 3.5 Preview test ACe

    It starts,

    in this test session will be divided into three parts:

    -3.4.7 Beta 1
    autologin
    Fast Start Stop
    Aim Mode 3.5
    AutoBurst 3.5
    previous Bugs fixes

    -3.4.8 Beta 2
    Weapons Database
    Back to Action SA

    -3.4.9 Beta 3
    GUI
    Logitech Integration 3.5
    Mobile Compatibility

    -3.5 release

    -3.5.1 Upgrade
    Voice Commands

    What we want to involve all of you and we want to understand if with the help of the users insert something else since we are working on.

    We will make available to you (members only) version 3.4.7 today, I will update this page with also the details about the changes and how to use them.

    We will consider also the realization of your ideas, we believe that the active collaboration is the way to create together a complete product.

    So the rules are simple and few:

    -You Tell us what you want
    -We Will do what you ask

    -You Do not ask for support via email for the test sessions, you must write in the forum.
    -We Check the forum regularly.

    -Not Are required to cooperate, you can use the beta in tranquility for the entire period of this session
    -We Without your help, we will try to do our best.

    In this beta release 3.4.7

    -Autologin
    We sped up the start, so do not need a login to your intervention.

    -Fast Start Stop
    We changed the mode of activation of the macro, you can now enable and disable a macro with a single button. Also switch from one macro to another now you can do it without passing through the stop.

    -Aim Mode 3.5
    We’ve added the ability to edit the macro when you shoot without aiming (HIP FIRE), and if you use a aim mode that hold pressed. For the latter, you can use an extra button to have the same immediacy.
    It will also be possible to choose whether the macro needs to be turned on or off when you are not aiming

    -AutoBurst 3.5
    I’m sure this feature will devote much time to argue. In this enhanced version of Autoburst we introduced different variables.

    First Delay is relative to the time it takes for the game to fire the first shot.
    The first delay is the time required for the event to be logged Mouse Down from the game, it is the time that starts when you press the left button with your finger until the HW signal is processed by the game.

    Let’s take an example:

    If I have a first delay of 5 ms and 3 ms imposed instead, it means that I’m telling MSE to emulate the event Left UP (I raise your finger from the left mouse button) before it is recorded from the game. This turns the gun does not shoot even the first shot.

    The first delay is a value that depends on the mouse used, the refresh rate and the performance of the CPU and memory, so a given variable.
    Your task is to find the minimum value. But as usual it’s easy: it starts at 1 and increases by 1 ms until the gun fails to fire the first shot.

    Delay is the time between one shot and another. So this is the time that must pass
    -Bugs fixes

    [EDITING]

    Still Working!

    • This reply was modified 9 years, 7 months ago by Admin.
    • This reply was modified 9 years, 7 months ago by Admin.
    • This reply was modified 9 years, 7 months ago by Admin.
    • This reply was modified 9 years, 7 months ago by Admin.
    • This reply was modified 9 years, 7 months ago by Admin.
    • This reply was modified 9 years, 7 months ago by Admin.
    • This reply was modified 9 years, 7 months ago by Admin.
    • This reply was modified 9 years, 7 months ago by Admin.
    • This reply was modified 9 years, 7 months ago by Admin.
    • This reply was modified 9 years, 7 months ago by Admin.

    In reply to: Hardware Lock (SOLVED)

    October 11, 2014 at 6:53 pm #1990
    Admin
    Keymaster

    Sorry for delay BRO !!!

    You are fixed now, but you dont change your HW ID. ex: CPU,MAC,HD ecc ecc or you get a LOCK.

    For the next time (NOT NOW) if you want reset your activation , you can reset (not change) your password in our site web, this resets your activation also.

    Best regards

    In reply to: Hardware Lock (SOLVED)

    October 11, 2014 at 1:09 pm #1984
    Admin
    Keymaster

    Have you changed Your connection or have you moved your cable?

    In reply to: Hardware Lock Please Help (SOLVED)

    October 9, 2014 at 12:18 pm #1966
    Admin
    Keymaster

    CLOSED

    In reply to: Hardware Lock Please Help (SOLVED)

    October 5, 2014 at 4:03 pm #1945
    Admin
    Keymaster

    investigating

    In reply to: Hardware Lock Please Help (SOLVED)

    October 3, 2014 at 6:14 pm #1936
    Admin
    Keymaster

    hi nibbi,

    i have fixed you. please try now! ๐Ÿ˜€

    In reply to: changed email-address (SOLVED)

    October 2, 2014 at 6:57 pm #1930
    Admin
    Keymaster

    Try Now
    ๐Ÿ˜‰

    In reply to: ? Hardware Locked (SOLVED)

    September 29, 2014 at 8:23 pm #1922
    Admin
    Keymaster

    Know … i follow your log.
    now i see all ok, if you need to change stick, please send me a mail with specs and brand.

    Best regards!

    In reply to: ? Hardware Locked (SOLVED)

    September 29, 2014 at 7:03 pm #1917
    Admin
    Keymaster

    Are you ok?
    Seems all ok here!!!
    ๐Ÿ˜‰

    In reply to: ? Hardware Locked (SOLVED)

    September 28, 2014 at 9:08 pm #1906
    Admin
    Keymaster

    Have you changed your connection?

Forum Statistics

Registered Users
2,584
Forums
7
Topics
621
Replies
3,348
Topic Tags
148

Recent Replies

Follow us

NewsLetter

Stay tuned !

Translate ยป